Wager's In-The-Line valves are used in locations where for appearance sake, you would not want to expose a vent valve on the ship's deck. It may also be used in areas that do not have adequate space for a vertical or inverted vent check.
Wager's In-Line Vent Valves protect tanks and bulkheads from pressure or vacuum buildup during loading or unloading of tanks. The ball float is designed to rise and seat when the ship takes a wash, protecting the tanks from being contaminated by sea water. Conversely, an In-The-Line may also be used to prevent liquids from rising out of the tanks and on to the ship's deck. In-Line's are available with or without flame screens. They are available in cast steel, bronze and aluminum. Sizes 1.5"-4" are available from stock. Larger sizes my be obtained by special request, if quantites warrant.
|
|
|
|
Valve Material: Aluminum, Bronze All aluminum castings are anodized.
Float Material: Stainless Steel, Monel, High Density Polyethylene
Float: Full float
|
| Connections: Butt Weld, Flanged, Threaded, Sil-Brazed
Sizes: 1-1/2, 2 inch diameters
|
|
|
