Turn the unit on, and press the Zero and Start Test button at the same time.
Display should read “Configuration Mode”. If not, turn meter off and repeat the procedure.
Set Date
Press SELECT twice.
Press ZERO for “set date” mode.
Press ZERO to change date format (toggles between the formats dd/mm and
mm/dd).
Press SELECT to set month 10’s digit. (06-12-98)
Press ZERO to scroll to your correct month 10’s digit.
Press SELECT to set month 1’s digit. (06-12-98)
Press ZERO to scroll to your correct month 1’s digit.
Press SELECT to set day 10’s digit. (06-12-98)
Press ZERO to scroll to your correct day 10’s digit.
Press SELECT to set day 1’s digit. (06-12-98)
Press ZERO to scroll to your correct day 1’s digit.
Press SELECT to set year 10’s digit. (06-12-98)
Press ZERO to scroll to your correct year 10’s digit.
Press SELECT to set year 1’s digit. (06-12-98)
Press ZERO to scroll to your correct year 1’s digit.
Set Time:
Press the SELECT button. The LED displays the following:
ZERO= set time XXXXX (your current time setting)
Press the ZERO for ”setting mode.”
Press ZERO to change time format (toggles between 12 and 24 hour clock).
Press the SELECT for “hour” mode.
Press ZERO to scroll to your correct hour.
Press the SELECT for “minute 10’s digit mode. (12:00 a.m.)
Press the ZERO to scroll to the correct minute 10’s digit.
Press the SELECT for “minute 1’s digit mode. (12:00 a.m.)
Press the ZERO to scroll to the correct minute 1’s digit.
|
