3100 Vacuum Air Release Odor Control Valve
Discontinued Model. See 2050-50-SA for equivalent model.
The 3100-V is designed for combination Vacuum Air Release Valves. The unit connects directly to an air release valve for odor control, with the added benefit of preventing corrosion in the manhole or vault from the H2S gas. Two air intake valves allow for up to 400 CFM of fresh air to intake directly into the lines without any restrictions from the media bed. This assures continued airflow during pumping sequences.
The 3100-V is constructed from aluminum, and is epoxy coated for protection from harsh environments. A canister containing 30 pounds of odor controlling media is located in the interior of the unit. The media is an engineered in pellet form to allow for optimum air flow thru the media bed. It then uses a chemical absorptive process changing the H2S gas into a non-toxic compound before exiting in to the atmosphere. The media is UL rated, and landfill disposable.
* Air Release Valve Sold Separately
3100-WSV Water Separator Valve
The water separator directly connects to both the air release valve and to the 3100 odor control valve. Air enters the water separator and a baffle directs the airflow to the bottom of the unit where moisture in the air can accumulate. Once the accumulating water reaches the level of a float in the unit, a drain will open and release the water into the wet well. The dry air proceeds to the top of the water separator, and enters in to the 3100 where the H2S gas is scrubbed with 30 pounds of odor controlling media.
The 3100-WSV is made from aluminum, and is epoxy coated for protection from the harsh environment. The media used to scrub the H2S gas is engineered in pellet form to allow for optimum air flow thru the media bed. A chemical absorptive process changes the H2S gas into a non-toxic compound before exiting into the atmosphere. The media is UL rated, and landfill disposable.